Reference guide · Compare profile shape, mounting interface and measurements · Confirm fit before ordering.
Manufacturer-catalog code reference · Offline staging

AmesburyTruth Foam-Tite 12364: three order codes

12364 is a manufacturer-described Foam-Tite kerf compression family with three recorded color-specific ordering codes, rather than three independent product profile answers.

Interpretation: Code-specific catalog data identifies a manufacturer series and selected dimensions; it is not a door/window fit or interchange certification.

Maker-listed code and dimensional evidence

Printed family / order codeCatalog color where supportedReach / projection (mm)Backing / kerf width (mm)
12364111691000Foam TPE - Brown9.0173.556
12364112091000Black9.0173.556
12364112191000Foam TPE - Bright White9.0173.556
12364not assigned by approved source9.0173.556

The manufacturer specification table reports 0.355 in reach (9.017 mm), 0.140 in backing width (3.556 mm) and recommended opening 0.120 in (3.048 mm); this is catalog information, not verified frame fit. The dynamic manufacturer specs viewer may not always display the entire table in a basic browser.

Read the original source

AmesburyTruth manufacturer profile/specification

How to compare a removed sample

  1. Photograph the relaxed seal end-on with a ruler and orientation marker.
  2. Measure the actual retaining stem or backing and its receiver opening independently.
  3. Measure relaxed reach, bulb/body diameter or height and the closed-door gap without stretching or crushing the sample.
  4. Compare only the matching published fields and units; a similar profile or printed code does not establish fit.
  5. For replacement confirmation, use the exact door/window maker, model, configuration and primary part drawing.

Stop rule: Catalog dimensions and historical printed-code references are identification clues only. Do not infer OEM fit, universal interchange, current inventory, or a replacement/supersession from these pages.

For generic cross-sections, return to foam-clad kerf profile identification; for the other Foam-Tite codes, compare 12025, 12079, 12364, and 12416. These are not listed as substitutes.